សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 24 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 04:08 យប់
The instability in the output image could be due to various factors. Here are some troubleshooting steps based on the user manual:
1. **Check Cable Length:** Ensure that the length of the network cable connected from the transmitter (TX) to the receiver (RX) is within the recommended 100 meters. Exceeding this length can lead to signal degradation and instability.
2. **HDMI Cable Length:** The HDMI cable length is recommended not to exceed 5 meters. Using longer HDMI cables can result in signal loss and affect image quality.
3. **Restart Devices:** Press the "reset" button on both the TX and RX panels to restart the devices and establish a fresh connection. This can help resolve any temporary issues causing instability.
By following these steps, you can address the instability in the output image and ensure a smoother viewបទពិសោធន៍ជាមួយ SIIG 4K60Hz HDMI Over IP Extender.
បន្ថែមមតិយោបល់ថ្មី។