សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 24 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 02:02 យប់
To confirm that your Zerostat 3 កាំភ្លើងប្រឆាំងឋិតិវន្ត is working properly, follow these steps as per the owner's manual:
1. Hold the Zerostat 3 within 12" (30.5 cm) of the surface or object to be treated.
2. Squeeze the trigger slowly for about two seconds to emit a stream of positive ionized air over the surface of the object.
3. As the trigger is slowly released, a negative flow of air ions is produced, resulting in static neutralization.
4. Repeat this procedure at several points across the surface of the object.
If the unit is functioning correctly, you should observe the static charges being neutralized on the surface of the object. Additionally, each squeeze of the trigger should result in a discharge of 1.5 Coulombs of charge. If you experience any issues or doubts about the functionality of your Zerostat ៣, refer to the complete instructions provided with the product or contact the manufacturer for further assistance.
បន្ថែមមតិយោបល់ថ្មី។