សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 23 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 03:44 យប់
To properly install the router on the MEEC TOOLS 022532 តារាងរ៉ោតទ័រសូមអនុវត្តតាមជំហានទាំងនេះ ដូចដែលបានរៀបរាប់នៅក្នុងសៀវភៅណែនាំ៖
1. **Fitting the Clampស៖ **
- Put the carriage bolts through the holes in the worktop.
- Place the clamps on the carriage bolts on the underside of the worktop with the hooks on the sides of the clamps បានងាកទៅផ្នែកខាងក្រោមនៃ worktop ។
- Fix the clamps in place with the supplied washers and nuts.
2. **Installation of Router on the Product:**
- Turn the product upside down.
- Put the router in the recess on the underside of the worktop and fit the clamps round it.
- Lock the router in place by tightening the nuts with an 8 mm spanner.
- Check that the router is firmly in place.
3. **Fitting and Removing Bits:**
- Place the product on its side.
- Fit or remove a bit on the router according to the instructions for the router.
- Stand the product upright again.
4. **Fitting Dust Extraction Adapter:**
- Put the dust extraction adapter in the dust extraction port behind the fence.
- Connect the product to the dust extraction device by connecting a hose to the dust extraction adapter.
By following these steps, you can properly install the router on the MEEC TOOLS 022532 តារាងរ៉ោតទ័រ សម្រាប់ការប្រើប្រាស់ប្រកបដោយសុវត្ថិភាព និងប្រសិទ្ធភាព។
បន្ថែមមតិយោបល់ថ្មី។