សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 23 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 02:15 យប់
To pair an additional emitter with the Keystone Sales Group DM35F-S ប្រព័ន្ធគ្រប់គ្រងវាំងននដោយស្វ័យប្រវត្តិអនុវត្តតាមជំហានទាំងនេះ៖
1. Press the "PROG" button on the existing emitter for 2 seconds. The motor will jog once, and then release the button to make a long noise, indicating the motor is ready for pairing.
2. Press the "STOP" button on the new emitter for 2 seconds. You should hear 2 jogs and 3 beeps, confirming that the new emitter has been successfully paired with the motor.
If you encounter any issues during the pairing process, refer to the troubleshooting section of the manual to identify possible causes and solutions. Remember to always follow safety instructions and ensure proper installation and operation of the curtain control system.
បន្ថែមមតិយោបល់ថ្មី។