សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 23 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 10:46 ព្រឹក
ដើម្បីភ្ជាប់ កាមេរ៉ាបញ្ច្រាស to your vehicle for proper functionality, follow these steps outlined in the instruction manual:
1. **Connect Monitor Input Harness:** Connect the signal output cable of the monitor to the RCA input cable.
2. **Connect Monitor Power Harness:** There are two recommended power connection methods:
- **Recommended Power Connection:** Connect the red wire (+12V) to a wire that is powered when the vehicle's accessories or ignition is turned on. Connect the black wire to the vehicle chassis.
- **Alternative Power Connection:** Connect the red wire from the monitor power harness to the red wire on the RCA video lead at the display monitor end. Connect the black wire to the vehicle chassis.
3. **Connect Video Extension Cable:** Connect one end of the video extension RCA cable to the RCA socket from the camera power harness. Run the cable to the front under the driver side dashboard to connect to the monitor's video input RCA (Yellow AV1).
4. **Connect Camera Power Harness:** Connect the red wire of the camera power harness to the wire that supplies power to the reversing lamp. Ensure to properly connect the positive and negative wires as instructed.
5. **Connect Camera Harness:** Connect the camera power harness to the camera harness. Mount the camera to the vehicle.
** ចំណាំបន្ថែម៖ **
- If your vehicle's reversing lights are driven by CAN BUS, additional wiring considerations may be necessary.
- Some vehicles with specific lighting systems may require a relay to supply power to the camera harness.
Following these steps and considerations will help ensure that your កាមេរ៉ាបញ្ច្រាស is properly connected to your vehicle for optimal functionality.
បន្ថែមមតិយោបល់ថ្មី។