សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 22 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 01:15 យប់
ដើម្បីភ្ជាប់ ឧបករណ៍ចាប់សញ្ញាបង្កើនល្បឿនកម្លាំងឥតខ្សែ PASCO PS-3202 to your computer or tablet device, you can follow these steps:
1. **Bluetooth Connection:**
- Turn on the Wireless Force-Acceleration Sensor. Ensure that the Bluetooth Status LED is blinking red.
- Open the software (SPARKvue or PASCO Capstone) on your computer or tablet.
- Navigate to the appropriate section for connecting wireless devices.
- Select the device that matches the unique device ID printed on your sensor from the list of available wireless devices.
- អនុវត្តតាមការណែនាំបន្ថែមលើអេក្រង់ ដើម្បីបញ្ចប់ដំណើរការផ្គូផ្គង។
2. **Micro USB Cable Connection:**
- Open the software (SPARKvue or PASCO Capstone) on your computer.
- Connect the provided micro USB cable from the sensor's micro USB port to a USB port or powered USB hub on your computer.
- The sensor should automatically connect to the software once the cable is plugged in.
3. **Data Collection:**
- Once the connection is established, select the measurements you wish to record.
- Start recording data by following the software's instructions for initiating data collection.
- Monitor and analyze the data collected from the sensor using the software's tools and features.
ដោយធ្វើតាមជំហានទាំងនេះ អ្នកគួរតែអាចភ្ជាប់បានដោយជោគជ័យ ឧបករណ៍ចាប់សញ្ញាបង្កើនល្បឿនកម្លាំងឥតខ្សែ PASCO PS-3202 to your computer or tablet device for data recording and analysis.
បន្ថែមមតិយោបល់ថ្មី។