សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 21 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 10:47 ព្រឹក
ដើម្បីភ្ជាប់ Variscite DART-MX8M-MINI Evaluation Kit to a host PC for debugging, follow these steps:
1. Plug the USB type A to micro B cable between the USB debug connector (J10) on the Evaluation Kit and a USB port on your PC.
2. Download and install any PC terminal software such as Putty on your host PC.
3. Configure the PC terminal software with the following parameters:
- Baud Rate: 115200
- ប៊ីតទិន្នន័យ៖ ៨
- ឈប់ប៊ីត៖ ១
- Parity: គ្មាន
- Flow Control: None
4. Once the cable is connected and the software is configured, you should be able to establish a serial communication link between the Evaluation Kit and your host PC for debugging purposes.
ដោយធ្វើតាមជំហានទាំងនេះ អ្នកអាចភ្ជាប់ដោយជោគជ័យ Variscite DART-MX8M-MINI Evaluation Kit to a host PC for debugging and view boot messages or interact with the device as needed.
បន្ថែមមតិយោបល់ថ្មី។