សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 21 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 10:34 ព្រឹក
ដើម្បីភ្ជាប់ Variscite DART-MX8M-PLUS Evaluation Kit to a PC for debugging, follow these steps:
1. Plug the USB type A to micro B cable between the USB debug connector (J29) on the Evaluation Kit and a USB port on your PC.
2. Download any PC terminal software such as Putty.
3. Set the parameters of the PC terminal software as follows:
- Baud Rate: 115200
- ប៊ីតទិន្នន័យ៖ ៨
- ឈប់ប៊ីត៖ ១
- Parity: គ្មាន
- Flow Control: None
By following these steps, you can establish a connection between the កញ្ចប់វាយតម្លៃ and your PC for debugging purposes.
បន្ថែមមតិយោបល់ថ្មី។