សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 19 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 10:03 ព្រឹក
យោងតាមសៀវភៅណែនាំអ្នកប្រើប្រាស់ តម្រងភាគល្អិត SMC HRS-PF005 កំណត់ម៉ាស៊ីនត្រជាក់, the particle filter element should be replaced when the pressure drop of the product reaches 0.15MPa. To replace the element, follow these steps:
1. Confirm that the pressure inside the filter is zero.
2. Refer to mounting procedure steps 3) and 4) in the user manual for detailed instructions on replacing the element.
3. Make sure to disconnect power from the chiller before performing the replacement.
4. Ensure that all circulating fluid is removed before replacing the element.
5. After replacing the element, check for any fluid leakage or condensation.
6. Operate the thermo-chiller to check that there are no leaks after replacing the element.
7. Adjust the flow rate to ensure the initial pressure drop is 0.05MPa or lower.
Following these guidelines will help maintain the efficiency and performance of your SMC Thermo Chiller.
បន្ថែមមតិយោបល់ថ្មី។