សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 18 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 02:22 យប់
To replace the trimmer line on the ឧបករណ៍កាត់ខ្សែអក្សរ RYOBI RY40204 40 វ៉ុលអនុវត្តតាមជំហានទាំងនេះ៖
1. **Prepare the Trimmer:** Ensure the trimmer is turned off and disconnected from the power source. Lay the trimmer on a flat surface for easy access.
2. **Remove the Spool Cover:** Locate the spool cover on the trimmer head. Unscrew the spool cover using a screwdriver to access the spool.
3. **Remove the Spool:** Once the spool cover is removed, carefully take out the spool from the trimmer head. Be cautious as the spool may still have trimmer line attached.
4. **Replace the Trimmer Line:** Remove any remaining old trimmer line from the spool. Cut a length of new trimmer line according to the manufacturer's recommended size.
5. **Thread the New Line:** Insert one end of the new trimmer line into one of the spool's line anchor holes. Wind the line evenly and tightly around the spool in the direction indicated by the arrows on the spool.
6. **Secure the Line:** Once the spool is fully wound with the new trimmer line, insert the end of the line into the opposite line anchor hole. Ensure the line is securely in place.
7. **Reassemble the Trimmer:** Place the spool back into the trimmer head, ensuring it fits properly. Replace the spool cover and xxxx it back into place securely.
8. **Test the Trimmer:** Turn on the trimmer and test the new trimmer line to ensure it feeds correctly and trims effectively.
Refer to the RYOBI RY40204 40 Volt String Trimmer សៀវភៅណែនាំអ្នកប្រើប្រាស់ for detailed diagrams and instructions on replacing the trimmer line.
បន្ថែមមតិយោបល់ថ្មី។