សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 17 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 01:49 យប់
ដើម្បីដំឡើងឱ្យបានត្រឹមត្រូវ GAGGENAU CI292112 Flex Induction Cooktopសូមអនុវត្តតាមជំហានទាំងនេះ ដូចដែលបានរៀបរាប់នៅក្នុងសៀវភៅណែនាំ៖
1. **Safe Installation:** Ensure that the appliance is correctly installed according to the installation instructions. The installer is responsible for ensuring the appliance works perfectly at its installation location.
2. **Electrical Connection:** Only an authorized expert or trained service technician should connect the appliance. Connect the appliance to a fixed installation with appropriate isolating switches. Use the supplied connection cable or contact customer service for a longer cable if needed.
3. **Fitted Units:** Install the induction hob above drawers or ovens with fan ventilation. Ensure the fitted unit is heat-resistant and can withstand loads of approximately 60 kg.
4. **Worktop:** Follow the worktop manufacturer's recommendations for a level, horizontal, and stable surface. Use heat-resistant and moisture-resistant reinforcement material for thin worktops.
5. **Ventilation:** Proper ventilation is crucial for the appliance to work correctly. Maintain clearances between the appliance and surrounding units as specified in the installation instructions.
6. **Installing Power Cord:** Follow the provided ការណែនាំ for connecting the power cord to the mains socket. Ensure the correct wiring according to the connection diagram and secure the power cord in place.
7. **Inserting the Hob:** Insert the hob into the cut-out in the worktop and secure it using the enclosed retaining clips. Seal tile joints on tiled work surfaces with silicone rubber.
8. **Connecting the Appliance:** Check the connection data on the rating plate and connect the appliance as shown in the circuit diagram. Ensure the appliance is ready for operation by checking the display.
9. **Special Combinations:** If installing the hob above an oven from another brand, use a wooden partition floor for proper installation.
10. **Removing the Appliance:** To remove the appliance, disconnect it from the mains power supply, remove any fastening brackets, and push out the hob from below.
By following these installation instructions carefully, you can ensure the safe and efficient operation of your GAGGENAU CI292112 Flex Induction Cooktop.
បន្ថែមមតិយោបល់ថ្មី។