សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 17 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 12:17 យប់
ដើម្បីរួមបញ្ចូល LP-M01 Plus ម៉ូឌុលបញ្ចូលឌីជីថល IoT ឧស្សាហកម្ម into your existing control system, follow these steps:
1. **Power Supply:** Connect the module to a power supply of 10-30VDC with a maximum power consumption of 3 Watts.
2. **Digital Inputs:** The module has a total of 8 binary inputs, with 4 internal wetted inputs for dry contacts and 4 inputs for any wetted contacts ranging from 10-250 VDC.
3. **Communications:** The LP-M01 supports Modbus TCP/RTU communication. Ensure that you have the LP-C01 module for Modbus communication. The wireless communication is encrypted using AES128 with custom authorization key support.
4. **Antenna:** The module comes with an external antenna for wireless communication. It supports LoRa-based encrypted communication at frequencies of 915MHz (US) and 868MHz (EU).
5. **Configuration:** Use the USB-C port for settings and firmware updates. You can configure the module using LP's configuration software to set up inputs, outputs, and communication parameters.
6. **Integration:** Connect the LP-M01 to your PLC or Automation Controller using Modbus TCP/RTU protocol. Ensure proper communication settings and address configuration to establish a reliable connection.
7. **Dependability:** The module features debounce support in both software and hardware to prevent false triggers. It also monitors communication status for low battery, interruptions, or device malfunctions.
By following these steps and referring to the LP-M01 Plus Industrial IoT Digital Input Module user manual for detailed instructions, you can successfully integrate the module into your control system for flexible monitoring applications and improved safety and reliability.
បន្ថែមមតិយោបល់ថ្មី។