សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 17 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 11:11 ព្រឹក
ដើម្បីដំឡើង និងប្រើប្រាស់ ឧបករណ៍បញ្ជាពីចម្ងាយឥតខ្សែ WiXHC PHB04B-4 with your CNC system, follow these steps based on the provided manual:
1. **Connection:** Connect the remote controller to your computer via the USB receiver. The key data is transmitted to the USB receiver, which then communicates with the CNC system software through the phb04b DLL.
2. **Functionality:** The remote controller supports 13 keys and 6 axes (x, y, Z, a, B, C). It also offers 4 magnification options and LCD data display with customizable content of up to 59 ASCII characters. Additionally, it features a 100ppr handwheel for precise control.
3. **Programming:** If you wish to customize the functionality of the remote controller, you can use the phb04b DLL for programming. The basic process involves loading the DLL, initializing, transmitting data, receiving data, opening the device, and shutting down the device using specific functions within the DLL.
4. **FCC Compliance:** The device complies with FCC regulations regarding interference and operation standards. It operates on the 433MHz ISM standard frequency band with data encryption for secure transmission.
5. **Troubleshooting:** If you experience interference that affects the operation of the device, follow the FCC guidelines provided in the manual. This includes reorienting the receiving antenna, increasing separation between devices, and consulting a professional if needed.
By following these instructions and guidelines, you can effectively set up and use the ឧបករណ៍បញ្ជាពីចម្ងាយឥតខ្សែ WiXHC PHB04B-4 with your CNC system, ensuring smooth and efficient operation during your machining tasks.
បន្ថែមមតិយោបល់ថ្មី។