សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 16 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 04:01 យប់
យោងតាមការណែនាំអំពីការដំឡើង Miele DAS 4640 Built-in Panel Extractor Hood, here are the recommended installation distances and requirements for optimal performance and safety:
1. Positioning: The rangehood should be centrally positioned over the cooktop for optimum vapour extraction. The cooktop should not be wider than the rangehood, and it is recommended that it be narrower, especially for safety distances greater than 750 mm.
2. Accessibility: The installation area must be easily accessible for maintenance purposes. Consider the positioning of cupboards, shelves, ceilings, or features near the rangehood to ensure easy access.
3. Installation Materials: The installation materials provided include exhaust connection, non-return flap, mounting brackets, drilling template, spacer strip, and screws. Ensure proper installation using these materials.
4. Installation Distance: The minimum safety distances between the cooking appliance and the rangehood vary based on the type of cooking appliance. For example, the minimum distance for an electric cooktop is 600 mm (AU, NZ) or 450 mm (HK, MY, SG, TH, TW). Gas cooktops are not compatible with this rangehood.
5. Air Extraction: Use approved nonflammable materials for exhaust ducting. Ensure the ducting is as short and straight as possible, with wide radius bends. Avoid kinks or compressions in the ducting to maintain efficient air extraction and low noise levels.
6. Vent Flue and Non-Return Flap: Direct the ducting into the vent flue's flow direction and use a non-return flap to prevent air exchange when the rangehood is not in operation.
7. Condensed Water: Properly insulate the ហត់នឿយ ducting to prevent condensation buildup. Install a condensate trap for horizontal ducting to collect and evaporate condensate.
8. Silencer: For noise reduction, consider adding a silencer to the ducting system. Position the silencer close to the ducting exit for extraction mode and between the exhaust connection and grille for recirculation mode.
9. Electrical Connection: Ensure proper electrical connection following national and local safety regulations. Do not use multi-socket adapters or extension cables. Consider using a residual current device (RCD) for added safety.
By following these installation guidelines, you can ensure optimal performance and សុវត្ថិភាព when installing the Miele DAS 4640 Built-in Panel Extractor Hood.
បន្ថែមមតិយោបល់ថ្មី។