សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 15 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 09:34 ព្រឹក
យោងតាមសៀវភៅណែនាំ អេ ឧបករណ៍បញ្ជាបើក-បិទ Smart ចុច can be adjusted to suit specific installation conditions by changing the ignition value using the setting xxxx (dowel) located on the front side of the device. Here are the steps to adjust the Smart Press:
1. Locate the setting xxxx (dowel) on the front side of the Smart Press.
2. To increase the ignition value, turn the xxxx clockwise.
3. To reduce the ignition value, turn the xxxx counterclockwise.
4. The standard model of Smart Press works correctly if the highest point of use doesn't exceed 15 meters. If your installation conditions require a different value, adjust the setting xxxx accordingly.
ដោយធ្វើតាមជំហានទាំងនេះ អ្នកអាចប្ដូរតាមបំណង ឧបករណ៍បញ្ជាបើក-បិទ Smart ចុច to meet the specific requirements of your pump system installation.
បន្ថែមមតិយោបល់ថ្មី។