សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 14 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 04:46 យប់
ដើម្បីដំឡើងឱ្យបានត្រឹមត្រូវ Hytera RD-98x Powerful Digital Repeaterអនុវត្តតាមជំហានទាំងនេះ៖
1. **Installation Environment:** Ensure the repeater is placed in a dry, well-ventilated area with an ambient temperature of -30℃~+60℃ and relative humidity of less than 95%.
2. **Installation Location:** The repeater can be installed in a rack, bracket, cabinet, or on a desk.
3. **Installation Tools:** You will need a cross-head screwdriver, a Torx screwdriver, and a spanner for installation.
4. **Before Installation:**
- Check the voltage of the DC power or battery to ensure it meets the repeater specifications.
- Verify the repeater is working properly by observing the 8 LEDs on the front panel.
- Configure appropriate parameters according to your requirements before on-site installation.
5. **ជំហានដំឡើង៖**
- Install the repeater at the desired location.
- Attach all necessary accessories.
- Ground the repeater using the Ground xxxx on the rear panel.
6. **Installing the Duplexer:**
- Loosen screws on the bracket and install the duplexer according to specifications.
- Connect the duplexer to the transmitter and secure it inside the repeater housing.
- Reconnect all cables and close the repeater cover.
7. **After-installation Verification:**
- Power on the repeater and observe the 8 LEDs on the front panel to verify proper operation.
By following these steps, you can ensure the proper installation of the Hytera RD-98x Powerful Digital Repeater, including setting up the duplexer and verifying its operation. For more detailed instructions, refer to the provided manual.
បន្ថែមមតិយោបល់ថ្មី។