សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 13 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 12:01 យប់
ដើម្បីផ្គូផ្គង Sonoff SNZB-02 ZigBee Smart Home Real Time Temperature sensor with the Sonoff ZigBee Bridge using the eWeLink app, follow these steps:
1. **Download the eWeLink App:** Make sure you have the eWeLink app installed on your smartphone.
2. **Connect the Bridge:** Before adding the sub-device (SNZB-02 sensor), ensure that the Sonoff ZigBee Bridge is connected and set up in the eWeLink app.
3. **Add Sub-Device:** Access the eWeLink app, select the Bridge you want to connect, and tap on "Add" to add a sub-device.
4. **Put Sensor in Pairing Mode:** Long press the reset button on the SNZB-02 sensor for 5 seconds until the LED indicator flashes three times. This indicates that the sensor is in pairing mode.
5. **Pairing Process:** Be patient and wait for the pairing process to complete. If the pairing fails, move the sub-device closer to the Bridge and try again.
6. **Successful Pairing:** Once the pairing is successful, the SNZB-02 sensor will be connected to the Sonoff ZigBee Bridge and can be used to monitor real-time temperature and humidity.
Remember, if you encounter any issues during the pairing process, refer to the user manual for troubleshooting tips or contact the customer support line provided in the សៀវភៅដៃ សម្រាប់ជំនួយ។
បន្ថែមមតិយោបល់ថ្មី។