សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 08 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 10:46 យប់
1. បើក Pentair Home app on your mobile device.
2. If you are a new user, tap on "Sign Up" to create a new account. If you already have an account, enter your email address and password to log in.
3. Fill in your email address and a strong password on the Sign Up page. Make sure to check the box agreeing to the Privacy Policy and Terms of Service.
4. Tap on "CREATE AN ACCOUNT" and then tap "SEND VERIFICATION" to receive an email for verification. Follow the instructions in the email to confirm your account.
5. Once confirmed, tap on "Login" at the top right of the screen.
6. On the Dashboard, tap "Add a Device" (water drop icon) and then tap on "IntelliSync" to add the device to your mobile device.
7. Slide the top cover of the IntelliSync unit upward and press and hold the MODE button for 3 seconds until the CONNECTION LED blinks, indicating it's ready for Bluetooth pairing.
8. Turn on Bluetooth on your mobile device and tap on IntelliSync on the Add a Device page. Tap "CONTINUE" to proceed with the Bluetooth pairing.
9. Tap on the name of your home network (SSID) and enter the password. Tap "CONTINUE" to connect to your home network.
10. Once connected, tap "CONTINUE" to complete the installation. Select the location of your pool on the map and tap "SAVE."
11. The installation is completed, and you can now access the IntelliSync Control and Monitoring System profile នៅលើកម្មវិធី។
សម្រាប់ជំនួយបន្ថែម ឬការដោះស្រាយបញ្ហា អ្នកអាចទាក់ទងបាន។ Pentair Technical Support at (800) 831-7133.
បន្ថែមមតិយោបល់ថ្មី។