សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 08 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 10:40 យប់
If you are experiencing any of the display-related issues mentioned above with your PENTAIR IntelliChem Controller, it is possible that the LCD Display module needs to be replaced. To confirm this, you can follow these steps:
1. **Check for Loose Connections:** Ensure all connections to the controller are secure and there are no loose cables or plugs.
2. **Power Cycle the Controller:** Turn off the power to the IntelliChem Controller at the circuit breaker, wait a few minutes, and then turn it back on to see if the display issue persists.
3. **Inspect the Display:** If the display continues to exhibit problems, carefully examine the LCD Display module for any physical damage, such as cracks or visible defects.
4. **Perform a Reset:** If the display issue remains unresolved, try performing a factory reset on the controller as per the manufacturer's instructions to rule out any software-related issues.
5. **Contact Technical Support:** If after performing these checks the display problem persists, it is advisable to contact PENTAIR's technical support team at 800.831.7133 or visit their webគេហទំព័រនៅ www.pentair.com for further assistance and guidance on potential LCD Display module replacement.
If you determine that the LCD Display module needs to be replaced, refer to the provided replacement instructions in the manual to safely and correctly install the new module. Remember to always follow safety precautions and, if unsure, seek professional help from a licensed electrician or pool professional.
បន្ថែមមតិយោបល់ថ្មី។