សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 07 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 11:40 យប់
ដើម្បីដំឡើងឱ្យបានត្រឹមត្រូវ ArduCam B0410 Time of Flight Camera on your Jetson Nano/NX, follow these steps:
1. **Find the camera connector:**
- Gently pull the plastic catch up.
2. **Insert the ribbon cable:**
- Ensure the pins are facing away from the catch.
- Push the catch back in to secure the cable.
3. **Connect the camera to Jetson Nano/NX:**
- Make sure the pins are facing away from the catch.
4. **Connect the power cables:**
- Connect the 2-pin power cable to the កាមេរ៉ា.
បន្ថែមមតិយោបល់ថ្មី។