សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 06 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 10:19 យប់
ដើម្បីភ្ជាប់ និងដំឡើងកម្មវិធី PureLink VIP-CAM-30-20x Pro PTZ កាមេរ៉ា with HDMI for network use, follow these steps based on the provided user manual:
1. **Device Connection:**
- Connect the camera to the network via an Ethernet cable.
- Power on the camera.
2. **LAN Connection:**
- Plug the camera into the same router as the PC.
- Use CameraCMS software to locate and find the camera on the LAN.
- Add the camera to manage and set its IP address in the same network segment as the router.
- Set the camera's gateway to the router's LAN IP address.
3. **WAN Connection:**
- Set the camera's IP address in LAN.
- Enter the router configuration interface and set up port mapping for external access.
- Access the camera from an external network using the WAN IP address and port.
4. **Search and List the Camera:**
- Use the CameraCMS software to search for online devices and list them.
- Upgrade multiple cameras in batch, modify device IP addresses, and control and preview កាមេរ៉ា។
5. ** ការកំណត់រចនាសម្ព័ន្ធ៖ **
- Choose the camera in the device list and open "Remote Configuration" to upgrade the camera or configure parameters.
- Set up stream parameters, including resolution, bitrate type, frame rate, key frame interval, video coding type, audio channels, and more.
6. **Network Settings:**
- Configure port settings for streaming and application ports.
- Connect the camera to the Ethernet following the above operations.
7. **RTMP Stream and Transparent Transmission:**
- Set up RTMP stream for video transmission.
- Enable transparent transmission for commands through VISCA-over-IP.
8. **Upgrade and System Settings:**
- Upgrade the camera firmware.
- Configure password settings, camera maintenance, device name, time configuration, and more.
ដោយធ្វើតាមជំហានទាំងនេះ អ្នកគួរតែអាចភ្ជាប់ និងដំឡើងបានដោយជោគជ័យ PureLink VIP-CAM-30-20x Pro PTZ Camera with HDMI for network use as per the user manual instructions.
បន្ថែមមតិយោបល់ថ្មី។