សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 05 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 04:17 ព្រឹក
According to the manual for the tecno switch SE336AN Mini Infrared ឧបករណ៍ចាប់សញ្ញាចលនា, you can adjust the detection distance and time delay using the DIP switch located on the sensor. Here's how you can do it:
1. **Detection Distance:** The sensor allows you to select a detection distance between 3 to 6 meters. To adjust this setting, use the "Sens adjust" option on the DIP switch. You can set the sensing distance to the desired range by toggling the switch between the minimum and maximum positions.
2. **Time Delay:** The sensor offers various time delay options for how long the lights stay on after motion is detected. You can choose from time delay settings of 5 seconds, 30 seconds, 1 minute, 3 minutes, 5 minutes, or 8 minutes. To adjust this setting, use the "Time delay" option on the DIP switch. Select the desired time delay by positioning the switch accordingly.
By adjusting these settings using the DIP switch as per the instructions provided in the manual, you can customize the detection distance and time delay of the tecno switch SE336AN Mini Infrared Motion Sensor to meet your specific requirements.
បន្ថែមមតិយោបល់ថ្មី។