សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 05 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 02:15 ព្រឹក
To configure the 2D imager on the Nordic ID HH83 Handheld Barcode Reader, you have three main methods available:
1. **Using Configuration Barcodes:**
- Generate a configuration barcode using Opticon's online configuration tools.
- Print the configuration barcode onto paper.
- Scan the configuration barcode with the 2D imager of the Nordic ID HH83.
- The new settings will be set and saved automatically.
2. **Using Nordic ID RFID Demo Application:**
- Generate configuration command strings using Opticon's configuration tool.
- Access the configuration settings in the Nordic ID RFID Demo application via the Settings menu or barcode functionality.
- Send the configuration file to the reader, and the settings will be automatically saved to the 2D imager.
3. **Configuring via NUR Accessory Extension API:**
- Utilize the NUR Accessory Extension API to send configuration strings to the 2D imager.
- The API provides a byte array response indicating the success or failure of the command sent.
- After sending the configuration, remember to save the settings to the non-volatile memory of the imager to prevent loss upon power down.
By following these methods, you can effectively configure the 2D imager on your Nordic ID HH83 Handheld Barcode Reader to suit your specific needs and optimize its performance. For more detailed instructions and examples, refer to the user guide provided with the device.
បន្ថែមមតិយោបល់ថ្មី។