សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 04 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 03:06 ព្រឹក
To connect and operate the LD Systems LDMAUI44G2 Cardioid Powered Column ឧបករណ៍បំពងសម្លេងអនុវត្តតាមជំហានទាំងនេះ៖
1. ** សន្និបាត៖ **
- Place the subwoofer on a flat surface with its rubber feet.
- Attach the lower vertical array column to the subwoofer, ensuring the multipin connectors interlock perfectly.
- Attach the upper vertical array column to the lower column in the same manner.
2. **ការតភ្ជាប់៖**
- Connect a playback device via the balanced XLR inputs.
- Use the integrated Bluetooth module for wireless control via smartphone or tablet.
- Adjust the overall volume using the MAIN level control and the subwoofer volume using the SUB level control.
3. ** ប្រតិបត្តិការ៖ **
- Monitor the system status display for indications such as PROTECT (overloaded/overheating), LIMIT (operating at upper limit range), SIGNAL (receiving audio signal), and POWER (device connected and switched on).
- Utilize the THRU output for sending the input signal and the SUB OUT for controlling the subwoofer extension.
- Pair and connect the internal Bluetooth unit with a Bluetooth playback device by pressing and holding the HOLD TO LINK button.
- Use the STEREO LINK function for wireless transmission of Bluetooth signal to another LDMAUI44G2 system for stereo extension.
4. **Cardioid Subwoofer Setup:**
- Enable or disable the cardioid preset on the subwoofer extension based on its orientation relative to the main subwoofer.
- Press and hold the CARDIOID button for about 2 seconds to change the status.
5. **Power Input:**
- Connect the power cable to the Neutrik powerCON mains input socket.
- Use the POWER switch for on/off control.
ដោយអនុវត្តតាមជំហានទាំងនេះ ហើយយោងទៅការណែនាំលម្អិតនៅក្នុង សៀវភៅណែនាំអ្នកប្រើប្រាស់, you can effectively set up and operate your LD Systems LDMAUI44G2 Cardioid Powered Column Loudspeaker for optimal audio performance.
បន្ថែមមតិយោបល់ថ្មី។