សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 03 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 09:10 យប់
To change the scale card on the BA367E-SS Counterសូមអនុវត្តតាមជំហានទាំងនេះ តាមសៀវភៅណែនាំ៖
1. **Access the Scale Card:** The scale card displaying the units of measurement is visible through a window on the right-hand side of the display.
2. **Remove the Existing Scale Card:**
- Unclip the protruding end of the flexible strip by gently pushing it upwards and pulling it out of the enclosure.
- Peel off the existing scale card from the flexible strip.
3. **Replace with a New Scale Card:**
- Obtain a new printed scale card, align it correctly, and insert it into the slot on the flexible strip.
- Make sure the new scale card is aligned properly as shown in the manual.
4. **Avoid Overlapping Scale Cards:**
- Do not fit a new scale card on top of an existing card to ensure accurate display.
5. **Optional Accessories:**
- New Counters come with a printed scale card showing the requested units of measurement. If not supplied, a blank card will be fitted.
- A pack of self-adhesive scale cards with common units of measurement is available as an accessory from បេខេ associates.
- Custom printed scale cards can also be supplied for specific requirements.
By following these steps, you can easily change the scale card on the BA367E-SS Counter without the need to remove the Counter from the panel or open the instrument enclosure.
បន្ថែមមតិយោបល់ថ្មី។