សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 01 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 10:43 យប់
To pair the wireless cameras with the monitor in the BOYO VTCRH2 systemអនុវត្តតាមជំហានទាំងនេះ៖
1. **Single Image Display Mode Pairing:**
- Under single image display mode, press and hold the "Pair" key on the front panel of the monitor.
- Follow the on-screen instructions to pair the cameras. If successful, the camera image will be displayed on the monitor.
- If pairing fails, the screen will display "Pair fail," and you will need to repeat the pairing process.
2. **Multiple Wireless Cameras Pairing:**
- For multiple wireless cameras, enter the related channel display on the monitor.
- Pair the cameras one by one following the same pairing process as described above.
3. **Pairing Process Duration:**
- The entire pairing process typically takes about 10 seconds to complete.
By following these steps, you can successfully pair your wireless cameras with the monitor in the BOYO VTCRH2 system for effective monitoring and backup assistance.
បន្ថែមមតិយោបល់ថ្មី។