សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ខែសីហា 29, 2025 - 08:46 PM
ដើម្បីដំឡើងកម្មវិធីបញ្ជាសម្រាប់ ជនរងគ្រោះ Energy CANUSB VE.Can to USB Interface and connect it to your computer for the first time, follow these steps as per the user manual:
1. System Requirements: Ensure you have Windows 10/8.1/7 (32/64-bit) on your computer.
2. Installing the Drivers:
a. Download the CANUSB driver from the Victron Energy webគេហទំព័រ។
b. Run PeakOemDrv.exe from the downloaded zip file.
c. Follow the instructions provided by the program. Select "CAN device drivers" on the "Custom Setup" page.
d. It is important to set up the driver before connecting the CANUSB adapter to the computer for the first time.
3. Connecting the Adapter for the First Time:
a. Connect the CANUSB adapter directly to a USB port on your computer or a connected USB hub. Do not use a USB extension cable.
b. Windows will detect the new hardware. After installation, you can work as a user with restricted rights again.
c. Once the initialization process is successful, the red LED on the CANUSB adapter will be illuminated.
4. LED ស្ថានភាព៖
- The red status LED on the CANUSB adapter indicates different statuses:
- On: Connected to the driver of the operating system.
- Slow blinking: A software application is connected to the adapter.
- Quick blinking: Data is being transmitted via the connected CAN bus.
5. ដ្យាក្រាមតភ្ជាប់៖
- Always use terminators on both ends of the VE.Can network.
- The CANUSB is for VE.Can only, not for VE.Bus or VE.Net.
6. Powering the VE.Can Network:
- The CANUSB does not power the network. Ensure at least one other connected product powers the VE.Can network.
- Listed products power the network, while others do not.
7. Using the CANUSB Adapter to Update Firmware:
- Download VE Power Setup from the Victron Energy website and follow the instructions in the VE Power Setup Manual.
For further details or specific instructions, refer to the user manual provided with the ជនរងគ្រោះ Energy CANUSB VE.Can to USB Interface.
បន្ថែមមតិយោបល់ថ្មី។