សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 29 ខែសីហា ឆ្នាំ 2025 - 12:04 ព្រឹក
To monitor the status of the EATON Battery Pack NE Plus for ExLin NE Plus and address any fault indications, you can refer to the operation and fault indicator section of the instruction manual. Here is a summary of the LED indicators and their meanings:
- **Mains Mode:**
- Green LED ON, Red LED OFF: Indicates fault-free status.
- Green LED OFF, Red LED ON: Detected emergency duration is lower than specified. Start emergency mode for 1 hour. If the Red LED remains ON, replace the battery.
- Green LED OFF, Red LED Flashing: Indicates electrical connection failure. Check the electrical connection to the luminaire.
- Green LED Flashing, Red LED ON: Battery previously discharged fully in discharge mode. Battery is charging. Charge the battery fully until Green flashing disappears and start emergency mode for 1 hour. If the Red LED remains ON, replace the battery.
- **Emergency Mode:**
- Green LED ON, Red LED OFF: Indicates fault-free status.
- Green LED OFF, Red LED ON: Detected emergency duration is lower than specified. "Return to mains and charge the battery. Start emergency mode for 1 hour. If the Red LED remains ON, replace the battery."
- Green LED OFF, Red LED Flashing: Indicates LED module connection failure. Disconnect the battery and check the LED module connection. If the flashing Red LED remains, it indicates LED module failure.
In case of any fault indication, follow the recommended actions as per the LED status displayed. It is essential to ensure the battery pack is operating correctly to maintain emergency lighting functionality in hazardous areas. Regularly monitor the LED indicators and take appropriate steps as outlined in the សៀវភៅដៃ to address any issues promptly.
បន្ថែមមតិយោបល់ថ្មី។