សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 27 ខែសីហា ឆ្នាំ 2025 - 02:26 ព្រឹក
ដើម្បីភ្ជាប់ច្រើន។ Juice Goose CQ Series devices and create a power sequencing system, follow these steps:
1. **Interconnection:** Each CQ device can operate as a master or slave unit. You can daisy chain multiple CQ devices to operate as a power sequencing system.
2. **Remote Contact Closure:** You can connect the Signal Input of the first CQ device to a latching contact closure using a double throw device to maintain contact closures. This setup allows for control of the sequencing function.
3. **RC-5 Remote Accessory:** Juice Goose offers the RC-5 Remote Control/Monitor accessory, which provides sequence control and status indicators for the power sequencing operation. The RC-5 connects directly to the Signal Input of the first CQ device.
4. **Sequence Switch:** For devices without a contact closure on the Signal Input, the switch on the CQ device itself can control its operation. The switches on the CQ 2200, CQ 3000, and CQ PD1-4 have three positions: Sequence Up, Sequence Down, and Manual On.
5. **Monitoring:** Some CQ Series devices have LEDs on the chassis for real-time monitoring of the device's operation. The LEDs indicate the processor status and sequence events.
By following these steps and utilizing the appropriate connections and accessories, you can easily set up and control a power sequencing system using Juice Goose CQ Series devices.
បន្ថែមមតិយោបល់ថ្មី។