សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ខែសីហា 25, 2025 - 11:09 PM
ដើម្បីដំឡើងឱ្យបានត្រឹមត្រូវ ទីវូលី RGB Trace Horizontal lighting system, follow these key steps outlined in the installation guide:
1. **Measure and Plan:** Measure the area where the Trace RGB is to be installed and plan the layout accordingly. Locate the power feed end at the highest point of the run to minimize exposure to water runoff.
2. **Mounting Channel:** Use a Mounting Channel for outdoor applications. Lay the channel along the desired area and attach it with screws every 18 to 24 inches. For bends and arcs, consider using the Horizontal Notched Channel.
3. **Installation:** Install the Trace RGB with two people, one to press the luminaire into the channel and the other to hold the spool and unroll it while keeping the Trace flex body straight.
4. **Power Connection:** Secure the power connection to the building using a C-clamp or mount the connection inside a J-Box. Connect to a 24V DC power supply according to the supplied wiring diagrams.
5. **Bending Limitations:** Be cautious of bending limitations to avoid product damage. Only bend the Trace RGB in the direction that does not twist the Tape Light.
6. **Additional Tips:** Use dry spray lubricant for easier installation, avoid hammering or pounding the luminaire into the channel, and handle the product carefully to prevent damage.
ដោយអនុវត្តតាមជំហានទាំងនេះ និងគោលការណ៍ណែនាំដែលមាននៅក្នុង ទីវូលី RGB Trace Horizontal installation guide, you can ensure a successful and damage-free installation of the lighting system.
បន្ថែមមតិយោបល់ថ្មី។