សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ខែសីហា 25, 2025 - 11:02 PM
កំឡុងពេលដំឡើង Trace™ TW Horizontal lighting system, it is crucial to handle the product with care to prevent any damage. Here are some key precautions to follow:
1. **Do not bend or hang down:** The Trace™ luminaire must not be allowed to bend or hang down to avoid exceeding the bending limit, which can result in product damage.
2. **Use two people for longer runs:** For longer runs of Trace™ lighting strands, it is recommended to have at least two people handle the installation to prevent any risk of product damage.
3. **Insert into channel evenly and gradually:** When inserting the Trace™ into the mounting channel, ensure it is done evenly and gradually to minimize twisting and bending, which can lead to damage.
4. **Avoid twisting or bending in the wrong direction:** Make sure not to twist or bend the Trace™ in the wrong direction, as this can cause damage to the product.
5. **Use dry spray lubricant:** Consider using a dry spray lubricant, such as 3M Spray Lubricant or WD-40 Specialist, during installation to help the luminaire fit into the channel without damage.
6. **Do not stretch, pull, or yank:** Avoid stretching, pulling, or yanking the Trace™ during installation, as this can damage the internal connections and void the warranty.
7. **Connect power carefully:** Secure the power connection to the building using a C-clamp or mount it inside a J-Box, following the supplied wiring diagrams for proper connection to a 24V DC power supply.
By following these precautions and handling instructions provided in the installation guide, you can ensure a successful and damage-free installation of the Trace™ TW Horizontal lighting ប្រព័ន្ធ។
បន្ថែមមតិយោបល់ថ្មី។