សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ខែសីហា 25, 2025 - 09:55 PM
ដើម្បីកែតម្រូវ ស្រអាប់ and prevent flickering at both minimum and maximum light levels, follow these steps as outlined in the manual:
1. **Adjustment of Least Dimmer Level (Minimum Light):**
- Dim the load to minimum light.
- Turn the potentiometer clockwise with a screwdriver to set the lowest ស្រអាប់ កម្រិត។
- Stop when you reach a satisfactory level where there is no flickering.
2. **Adjustment of Maximum Dimming Level/Flicker (Maximum Light):**
- Dim the load to maximum light.
- If there is flickering, turn the potentiometer clockwise with a screwdriver to reduce the flickering.
- Stop when you reach a satisfactory level with no flickering.
- For exact adjustment, turn the potentiometer just before the light begins to dim and stop when satisfied.
By following these adjustment procedures, you should be able to eliminate flickering at both the minimum and maximum dimmer levels. Remember to refer to the manual for additional troubleshooting tips if the issue persists.
បន្ថែមមតិយោបល់ថ្មី។