សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ខែសីហា 22, 2025 - 09:49 PM
នេះបើតាម សៀវភៅណែនាំ, here is how you connect the control box to power in your vehicle:
1. **Cigarette Power Adapter:** Plug the control box Cigarette Power Adapter into an available 12-volt charging port in your vehicle.
2. **Fuse Tap Connection:** Alternatively, you can connect the positive wire to the fuse tap and connect the open negative wire to a ground (any metal surface). Then plug the fuse tap into a 10-amp ប្តូរហ្វុយហ្ស៊ីប
3. **Important:** Ensure that the connection does not exceed 10 amps to prevent early failure of the kit.
4. **Warning:** Do not directly wire to the car battery. Use the provided fuse tap for connection.
By following these steps, you can properly power the control box of the underbody lighting kit នៅក្នុងរថយន្តរបស់អ្នក។
បន្ថែមមតិយោបល់ថ្មី។