សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ខែសីហា 22, 2025 - 09:26 PM
To adjust the brightness levels and modes of the OKPRO S-1152B 1200W Solar Street Lights using the remote control, follow these steps as outlined in the user manual:
1. **ON Button:** Press this button to set the light to fixed 100% brightness. You can adjust the brightness using the remote control. The light will automatically turn on at dusk and off at dawn.
2. **OFF Button:** Press this button to turn off the lights. The light will not come on automatically the next day. If you need the light to come on, you will need to turn it on again using the remote control.
3. **Motion Sensor Mode:** In this mode, when people are close to the light, it will be at 100% brightness. When people are far away, the brightness will decrease to 30%. The light will not turn off in this mode. It automatically turns on at dusk and off at dawn.
4. **Brightness Adjustment:** You can adjust the brightness levels to 25%, 50%, 75%, or 100% using the corresponding buttons on the remote control.
5. **Timer Settings:** You can set the light to operate at fixed 100% brightness for 2, 3, 6, or 8 hours before switching to motion sensor mode.
By following these instructions and using the remote control provided with the OKPRO S-1152B 1200W Solar Street Lights, you can easily adjust the brightness levels and modes to suit your specific lighting needs and preferences.
បន្ថែមមតិយោបល់ថ្មី។