សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 22 ខែសីហា ឆ្នាំ 2025 - 07:00 ព្រឹក
ការដំឡើងនិងការជំនួស lamp នៅក្នុង សូឡូស PDO083 8.3 Inch Dome Path Light is a common query for users looking to maintain or upgrade their outdoor lighting fixture. Here's a step-by-step guide based on the provided manual:
1. ** ការដំឡើង **៖
- Begin by ensuring the power source is turned off before starting the installation process.
- Insert the 7/8" diameter stem of the fixture into the ground stake provided. Make sure it is securely placed in the desired location.
- Connect the pre-wired 18-2 lead wire to your 12 Volt system using the King® DryConn™ waterproof connectors included.
- Once the electrical connections are secure, the fixture is ready for lamp ការដំឡើង។
2. **Lamp Replacement**:
- To replace the lamp, first, make sure the power is turned off to avoid any electrical hazards.
- Unscrew the stepped, threaded collar located at the underside of the 8.3" diameter hat. This collar allows for tool-less attachment and easy relamping.
- Carefully remove the clear 4mm thick glass lens to access the lamp.
- Gently remove the existing T3-G4 bi-pin lamp from the ceramic G4 bi-pin socket.
- If you are substituting the lamp with a ProLED® lamp, ensure to use the correct lamp product code as indicated in the manual.
- Insert the new lamp into the socket, making sure it is securely in place.
- Reattach the clear glass lens and xxxx the collar back on to secure the lamp នៅនឹងកន្លែង។
3. **Maintenance**:
- Regularly inspect the fixture for any dirt or debris that may obstruct the light output.
- Clean the glass lens and aluminum housing with a mild detergent and water solution to maintain optimal performance.
- Check the connections periodically to ensure they are secure and free from corrosion.
By following these installation and lamp replacement instructions outlined in the សៀវភៅដៃ, users can effectively maintain and enhance the functionality of their សូឡូស PDO083 8.3 Inch Dome Path Light.
បន្ថែមមតិយោបល់ថ្មី។