សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 22 ខែសីហា ឆ្នាំ 2025 - 03:39 ព្រឹក
1. **Plug in the AC adapter:** Connect the AC adapter to the AC charging port on your ហ៊ូម៉ា and then plug the adapter into a power outlet using the supplied power cord. This will ensure your device has power.
2. **Turn on your Huma:** Lift the LCD screen lid and press the power button on the computer. Make sure not to grasp the area around the camera when lifting the lid to avoid malfunctions.
3. **Set up Windows:** Follow the instructions displayed on the Windows Setup window to make initial settings. Do not turn off your Huma before the Windows Setup window appears.
4. **Connect to the Internet:** You can connect to the Internet either via a Wi-Fi (wireless LAN) or wired LAN network. Follow the instructions in the manual to establish a successful Internet connection.
5. **Run Windows Update:** Ensure your system is up to date by selecting (start), (Settings), and Windows Update. Follow the on-screen instructions to update Windows.
6. **Update Huma's software:** The USB drive included in the box contains all the drivers you need. Visit the Monster Notebook website for the latest versions of the drivers.
7. **Create your own recovery media:** Before using your computer for the first time, create recovery media with a USB flash drive. Refer to the Safety Guide/Recovery and Troubleshooting Guide for detailed instructions.
8. **Using the fingerprint sensor:** You can use the fingerprint sensor for Windows Hello functions. Follow the steps in the manual to enroll your fingerprint for authentication.
ដោយធ្វើតាមជំហានទាំងនេះ អ្នកគួរតែអាចដំឡើងរបស់អ្នក។ Monster Huma H5 V4.2 Notebook successfully for first-time use.
បន្ថែមមតិយោបល់ថ្មី។