សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 21 ខែសីហា ឆ្នាំ 2025 - 01:06 ព្រឹក
To set up an external storage device with your ការត្រួតពិនិត្យ ៤ C4-CORE5 Core 5 Controller, follow these steps:
1. **Requirements:** Ensure you are using an externally powered USB drive or a solid-state USB drive (USB thumb drive). USB hard drives without a separate power supply are not supported.
2. **Connection:** Connect the USB drive to the USB port on the controller labeled "USB." Ensure the drive is compatible with the controller.
3. **Configuration:** Once the external storage device is connected, you will need to configure or scan the media on the device using Composer Pro. This software is required to set up and manage the controller. Refer to the Composer Pro User Guide for detailed instructions on configuring external storage devices.
4. **NAS Drive:** Alternatively, you can also use a NAS drive as an external storage device. Refer to the Composer Pro User Guide for specific details on setting up a NAS drive with your controller.
5. **Formatting:** When using USB or eSATA storage devices with the CORE-5 controller, it is recommended to have a single primary partition formatted as FAT32.
By following these steps, you can successfully connect and utilize an external storage device with your ការត្រួតពិនិត្យ ៤ C4-CORE5 Core 5 Controller for storing and accessing media content.
បន្ថែមមតិយោបល់ថ្មី។