សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 20 ខែសីហា ឆ្នាំ 2025 - 03:32 ព្រឹក
ដើម្បីភ្ជាប់ Technaxx TX-200 VRLA 7 Ah Lead Acid Black-silver PV Micro Inverter to your solar panel system and household grid, follow these key steps for installation and operation:
1. Mounting: Ensure the micro inverter is securely mounted on the racking system or panel frame, ideally in a location that receives ample sunlight for efficient power generation.
2. Solar Panel Connection: Use the provided MC4 connector to connect the solar panel to the micro inverter. Ensure a secure and weatherproof connection to maximize power yield.
3. MPPT Charge Controller: The integrated MPPT charge controller optimizes power output from the solar panels. Make sure the MPPT voltage range (DC29-48V) is within the specifications of your solar panel system.
4. Grid Connection: The micro inverter is designed for on-grid systems, allowing you to feed power into the 230V household grid via a socket plug. Ensure proper grounding and compliance with safety standards during the connection process.
5. Safety and Compliance: Verify that the micro inverter meets safety standards such as VDE-AR-N 4105:2018, EN50549-1:2019, and VFR2019. Follow all safety precautions outlined in the user manual to prevent accidents or damage.
6. Operation: Once the connections are established, monitor the performance of the micro inverter and solar panel system. Check for any error indicators or abnormal behavior that may require troubleshooting.
ដោយអនុវត្តតាមជំហានទាំងនេះ និងយោងទៅ សៀវភៅណែនាំអ្នកប្រើប្រាស់ for detailed instructions, you can effectively install and operate the Technaxx TX-200 VRLA 7 Ah Lead Acid Black-silver PV Micro Inverter for your solar power setup.
បន្ថែមមតិយោបល់ថ្មី។