សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 20 ខែសីហា ឆ្នាំ 2025 - 02:20 ព្រឹក
នេះបើតាម មន្ទីរពិសោធន៍ ១២ TX-500 Ultra-Compact Transceiver Owner's Manual, updating the firmware on the device is a straightforward process. Here's a step-by-step guide to help you through the firmware update:
1. Connect your Lab599 TX-500 to your computer using the provided USB cable.
2. Visit the Lab599 webគេហទំព័រ (www.lab599.com) to check for any available firmware updates for your device.
3. ទាញយកការអាប់ដេតកម្មវិធីបង្កប់ចុងក្រោយបំផុត។ file ទៅកុំព្យូទ័ររបស់អ្នក។
4. Open the firmware update software on your computer.
5. Follow the on-screen instructions to select the downloaded firmware update file.
6. Ensure that your Lab599 TX-500 is powered on and connected to the computer.
7. Initiate the firmware update process as directed by the software.
8. Wait for the update process to complete. Do not disconnect the device during the update.
9. Once the update is finished, disconnect your Lab599 TX-500 from the computer and power cycle the transceiver.
By following these steps, you should be able to successfully update the firmware on your មន្ទីរពិសោធន៍ ១២ TX-500 Ultra-Compact Transceiver. If you encounter any issues during the update process, you can reach out to Lab599 support for assistance at support@lab599.com.
បន្ថែមមតិយោបល់ថ្មី។