សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 20 ខែសីហា ឆ្នាំ 2025 - 12:37 ព្រឹក
នេះបើតាម សៀវភៅដៃ, changing the scale card on the BA307E-SS or BA327E-SS indicators is a straightforward process. Here are the steps:
1. Locate the Scale Card Slot: The scale card is visible through a window at the right-hand side of the display. It is mounted on a flexible strip that is inserted into a slot at the rear of the instrument.
2. Remove the Existing Scale Card: Unclip the protruding end of the flexible strip by gently pushing it upwards and pulling it out of the enclosure. Peel off the existing scale card from the flexible strip.
3. Replace with a New Scale Card: Align the new printed scale card with the slot on the flexible strip and insert it back into the enclosure. Ensure that the new scale card is properly aligned and fits securely.
4. Avoid Overlapping Scale Cards: Do not fit a new scale card on top of an existing card. Make sure to replace the old scale card completely with the new one.
5. Optional Scale Cards: If the indicator was ordered without specific units of measurement, a blank scale card would have been fitted. You can order a pack of self-adhesive scale cards with common units of measurement from BEKA associates or request custom printed scale cards.
By following these steps, you can easily change the scale card on your BA307E-SS or BA327E-SS indicator without the need to remove the instrument from the panel or open the enclosure.
បន្ថែមមតិយោបល់ថ្មី។