សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 19 ខែសីហា ឆ្នាំ 2025 - 01:28 ព្រឹក
To change the charging power setting on your មេត្រូន PC03X MART Portable EV Charging Station without using the WiFi connection, follow these steps:
1. Press and hold the push button on the charging station until the STATUS LED switches off immediately.
2. After 5 seconds, the STATUS LED will start blinking slowly.
3. Release the push button after a certain number of blinks to determine the desired charging current/power setting:
- For PC03X+, the available charging current/power settings are based on the number of blinks.
- The new charging current/power setting will be stored in the memory and will remain the same even after the power supply is disconnected until the next setting change is performed.
Please note that the specific number of blinks corresponding to each charging current/power setting is detailed in the សៀវភៅណែនាំអ្នកប្រើប្រាស់ for reference. This manual adjustment method provides a convenient way to customize the charging power without relying on the WiFi connection.
បន្ថែមមតិយោបល់ថ្មី។