សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 19 ខែសីហា ឆ្នាំ 2025 - 12:57 ព្រឹក
To program and operate the P1353ME mechanism in the អន្តរទ្វីប PE35300 80A Load Center, follow these steps based on the manual:
1. Programming Instructions:
- Press the PROG key to cycle through menu options.
- Use the UP and DOWN arrow keys to change program settings.
- Press the ENTER key to save changes and exit programming mode.
2. ប្រតិបត្តិការដោយដៃ៖
- Use the ON/OFF keys to manually turn devices ON or OFF.
3. Valve Actuator Supply:
- The valve actuator supply should be 24 V with a maximum of 40 VA.
4. Digital Control Ratings:
- Clock Source Voltage: 120/240 VAC, 60 Hz
- Power Consumption: 6.0 W Max
- Contact Configuration: SPST - each circuit
5. ព័ត៌មានបន្ថែម៖
- The P1353ME mechanism allows for 3 ON/OFF events per circuit.
- It has a memory retention of 40 years for all programmed settings with an 8-hour time retention.
By following these instructions, you should be able to effectively program and operate the P1353ME mechanism in the អន្តរទ្វីប PE35300 80A Load Center for your desired control applications.
បន្ថែមមតិយោបល់ថ្មី។