សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ខែសីហា 17, 2025 - 10:06 PM
ដើម្បីភ្ជាប់ ឧបករណ៍ 2619529 5 អិល ម៉ាស៊ីនបញ្ចូលខ្យល់ ទៅកាន់ប្រភពថាមពល សូមអនុវត្តតាមជំហានទាំងនេះ៖
1. Power Supply Options: This product can receive power from three different sources: mains power (AC), power tool battery (DC), and battery (DC).
2. Mains Power (AC):
- Fully unwind the power cable before connection.
- Wrap the cable around the cable organizer after use.
3. Power Tool Battery (DC):
- Connect a compatible battery pack to the battery pack slot.
- Disconnect the battery after use.
4. Battery (DC):
- Preconditions: Battery contact terminals are clean.
- If connecting to a battery installed in a vehicle, ensure the engine and electrics are switched OFF.
- Connect the red (+) clamp ទៅស្ថានីយថ្មវិជ្ជមាន (+) ។
- Connect the black (-) clamp ទៅស្ថានីយថ្មអវិជ្ជមាន (-) ។
- គ្រវីក្បាល clamps ត្រឡប់មកវិញដើម្បីធានាទំនាក់ទំនងល្អ។
- Connect the adaptor to the battery slot.
5. Disconnecting Cables from Battery:
- Disconnect the black (-) clamp ពីស្ថានីយថ្មអវិជ្ជមាន (-) ។
- Disconnect the red (+) clamp ពីស្ថានីយថ្មវិជ្ជមាន (+) ។
6. ប្រតិបត្តិការ៖
- Firmly hold the air hose when installing or disconnecting to prevent hose whip.
- Check the air tank for signs of rust and damage before each use.
7. ការរៀបចំសម្រាប់ការប្រើប្រាស់៖
- Switch the power OFF.
- Visually inspect the air hose and accessories before attaching.
- Ensure air outlets are closed.
8. Using the Compressor:
- Connect the product to a power source.
- Select the power supply option using the power switch (DC for battery, AC for mains power).
- Set the Running Speed using the Fast/Silence button.
- Switch the compressor ON using the ON/OFF button.
- Adjust the Setting Pressure using the +/- buttons.
- Switch the compressor OFF when finished.
By following these steps, you can safely and correctly connect your ឧបករណ៍ 2619529 5L Air Compressor to a power source for operation.
បន្ថែមមតិយោបល់ថ្មី។