សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 14 ខែសីហា ឆ្នាំ 2025 - 05:05 ព្រឹក
ដើម្បីភ្ជាប់ និងដំណើរការ THORLABS 2022 6-Wavelength High-Power LED Source using the Chrolis software, follow these steps:
1. តម្រូវការផ្នែករឹង៖
- Ensure your PC meets the hardware requirements specified in the សៀវភៅណែនាំអ្នកប្រើប្រាស់, including CPU speed, RAM, graphic card, and available disk space.
- Connect the CHROLIS device to your PC using a free USB 2.0 port.
2. តម្រូវការកម្មវិធី៖
- Download the Chrolis software package from the Thorlabs webគេហទំព័រ។
- Install the software on your PC following the installation instructions provided in the manual.
3. Start Application:
- Launch the Chrolis software either from the desktop icon or the START button on your PC.
4. ភ្ជាប់ទៅឧបករណ៍៖
- Click on the "Connect" button in the software to establish a connection with the CHROLIS device.
- Select the recognized device from the dialog box and press OK to connect.
5. Operate LEDs:
- Use the Master Tab in the software to control the LEDs in Continuous Wave (CW) mode.
- Adjust the power of each LED using the sliders or by entering values.
- Activate the desired LEDs by setting the intensity and turning on the Master switch.
6. Pulsed Mode:
- Switch to the Pulse Mode to pulse individual LEDs and configure additional input/output channels.
- Use internal pulse generation or external triggering to control LED pulsing.
- Configure additional channels as input or output for triggering other devices.
7. Save/Load Settings:
- Save your software settings using the "Save" button and load them later using the "Load" button.
- Make sure to save settings before activating the LEDs to prevent them from turning off.
8. លក្ខណៈពិសេសបន្ថែម៖
- Explore options in the software such as naming LEDs, choosing temperature units, and running demo sequences.
- Utilize the software's graphical user interface to customize LED settings and monitor LED spectra and temperatures.
By following these steps and referring to the detailed instructions in the user manual, you can effectively connect and operate the THORLABS 2022 6-Wavelength High-Power LED Source using the Chrolis software.
បន្ថែមមតិយោបល់ថ្មី។