សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ខែសីហា 13, 2025 - 10:55 PM
ដើម្បីធានាថា ស ឧបករណ៍ Klein NCVT-1XTKIT is functioning properly, follow these steps:
1. Self-Test: Press the Power On / Off button. After performing a self-test, a green LED in the tip will illuminate if no voltage is detected. This indicates that the tester is functioning correctly.
2. Test on Known Live Circuit: Before each use, test the tester on a known live circuit to verify its functionality. This will help confirm that the tester is detecting voltage as intended.
3. Audible and Visual Indicators: Place the tip of the tester near an AC voltage ប្រភព។ ប្រសិនបើ voltage is present, the unit will emit audible beeps and the red LED in the tip will illuminate. This indicates that the tester is detecting voltagអ៊ី ត្រឹមត្រូវ។
ដោយធ្វើតាមជំហានទាំងនេះ អ្នកអាចធានាថារបស់អ្នក។ ឧបករណ៍ Klein NCVT-1XTKIT Non Contact Voltage and GFCI Receptacle Electrical Test Kit is working correctly and ready for use.
បន្ថែមមតិយោបល់ថ្មី។