សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ខែសីហា 13, 2025 - 07:00 PM
To change the scale card on the BEKA BA378E កម្មវិធីកំណត់ម៉ោង ឬនាឡិកាសូមអនុវត្តតាមជំហានទាំងនេះ តាមសៀវភៅណែនាំ៖
1. Remove Existing Scale Card:
- Unclip the protruding end of the flexible strip by gently pushing it upwards and pulling it out of the enclosure.
- Peel off the existing scale card from the flexible strip.
2. Replace with New Scale Card:
- Align the new printed scale card onto the flexible strip.
- Insert the strip back into the Timer or Clock as shown in the manual.
3. កំណត់ចំណាំសំខាន់ៗ៖
- Do not fit a new scale card on top of an existing card.
- New Timer or Clocks are supplied with a printed scale card showing the requested units of measurement. If not supplied, a blank card will be fitted.
- A pack of self-adhesive scale cards printed with common units of measurement is available as an accessory from BEKA associates. Custom printed scale cards can also be supplied.
By following these steps, you can easily change the scale card on your BEKA BA378E កម្មវិធីកំណត់ម៉ោង ឬនាឡិកា without the need to remove the device from the panel or open the instrument enclosure.
បន្ថែមមតិយោបល់ថ្មី។