សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ខែសីហា 13, 2025 - 06:52 PM
ដើម្បីផ្លាស់ប្តូរកាតមាត្រដ្ឋាននៅលើ BEKA BA304G Loop Powered Indicatorសូមអនុវត្តតាមជំហានទាំងនេះ តាមសៀវភៅណែនាំ៖
1. Removing the Scale Card:
- Carefully pull the tab perpendicularly away from the rear of the indicator assembly to remove the scale card.
2. Replacing the Scale Card:
- Insert the new scale card into the slot on the right-hand side of the input terminals. Apply even force to both sides of the scale card to prevent twisting.
- Insert the card until about 2mm of the transparent tab remains protruding.
3. Custom Scale Cards:
- If you need a custom printed scale card, they are available from បេខេ សហការី។
4. ព័ត៌មានបន្ថែម៖
- The scale card displays the indicator's units of measurement and tag information above the display.
- New instruments come with a scale card showing the information requested at the time of ordering. If not provided, a blank scale card will be fitted, which can be marked on-site.
Refer to the full instruction manual for more detailed information and visual references on changing the scale card.
បន្ថែមមតិយោបល់ថ្មី។