សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ខែសីហា 13, 2025 - 05:47 PM
The LED current on the ហ៊ីត្រូនីក HED2040 DALI អ្នកបើកបរ LED can be easily configured by choosing the correct combination of the DIP switches. Here is how you can select the LED current:
1. Refer to the table in the instruction manual that corresponds to the LED current selection.
2. Locate the DIP switches on the driver.
3. Configure the DIP switches according to the desired LED current setting as per the table provided in the manual.
4. Ensure that you have selected the correct LED current before starting the driver to avoid any issues with the connected LEDs.
By following these steps and referring to the DIP switch configuration table in the manual, you can easily select the appropriate LED current for your specific requirements.
បន្ថែមមតិយោបល់ថ្មី។