សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 13 ខែសីហា ឆ្នាំ 2025 - 02:56 ព្រឹក
ដើម្បីកំណត់ឡើងវិញ JVC HA-NP35T Open Ear Wireless Earphones to the initial state, follow these steps as outlined in the សៀវភៅណែនាំអ្នកប្រើប្រាស់:
1. Insert both the left (L) and right (R) earphones into the charging case to charge them. The L and R indicators will light up to indicate charging.
2. Press and hold the touch sensor area on the L earphone for about 15 seconds until the L indicator flashes twice.
3. Repeat the same process for the R earphone by pressing and holding the touch sensor area for about 15 seconds until the R indicator flashes twice.
4. Remove both earphones from the charging case and place them side by side. The L and R indicators will light up, indicating the power is on.
5. After a short while, the earphones will connect to each other, with the R indicator flashing slowly and the L indicator flashing quickly and repeatedly.
6. This indicates that the settings have been restored to the initial state (factory default), and the earphones are ready for device pairing.
Once the L and R indicators flash quickly, the earphones are ready to be paired with a Bluetooth device. If you encounter issues with sound emission from one side even after pairing, turn off the earphones by touching and holding the touch sensor area on both earphones, and repeat the steps from the beginning.
បន្ថែមមតិយោបល់ថ្មី។