សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 13 ខែសីហា ឆ្នាំ 2025 - 12:02 ព្រឹក
To perform a resistance test using the បច្ចេកទេសសំខាន់ MT832 Analogue Multimeter, follow these steps:
1. Set the Function Switch: Turn the function switch to the highest Ω position for resistance testing.
2. Insert Test Leads: Insert the test leads into the COM (Black lead) and "+" socket (Red lead) on the multimeter.
3. Zero Corrector Adjustment: Short the test leads together and turn the 0Ω adjusting xxxx to set the pointer to the zero position.
4. Check for Voltage: Ensure there is no voltage present across the circuit you are testing.
5. Connect to Resistor: Connect the test leads to the resistor you want to test and refer to the reference table for reading the scale accurately. You may need to reset the function switch to lower Ω positions for higher resolution readings.
6. Interpreting the Reading: The multimeter will display the resistance value of the tested resistor based on the scale and multiplier indicated in the reference table.
By following these steps and referring to the provided reference table, you can accurately conduct a resistance test using the បច្ចេកទេសសំខាន់ MT832 Analogue Multimeter.
បន្ថែមមតិយោបល់ថ្មី។